Allen & Heath DJ Mixer. 2 channels with Penny and Giles cross Fader for great quality reliablity. The Xone 02 2 Channel DJ Battle Mixer with Pan, EQ and FX inserts.
Allen & Heath created Xone:02 to be the world's greatest battle/scratch mixer. The crossfader is a deluxe Penny & Giles VCA design, reversible, they all have contour controls and they can all be easily replaced by removing the steel faceplate. The fader area is kept clear for action and controls like pan and EQ are out of the way on low profile sliders. Even the transform switches can be rotated to work the way you like them. Don't go into battle with anything less.
2 Dual Stereo Channels
Channels have RIAA [RCA] inputs, switchable to line, plus stereo line level inputs [RCA], each with gain control. Powerful 3 band 'music' EQ on sliders. High quality 45mm faders. Input reverse switch for battle mixing. Pre fade monitoring on 12 segment 3 colour peak reading bar meters
Mic Channel
2 XLR inputs with separate gain controls, on switch and 3 band EQ with HPF. Routes direct to mix outputs. FX insert on button
Stereo Mix Outputs
Balanced mix outputs on XLR with multi-point VCA level master control. The mix output level can be displayed on the 12 segment 3 colour peak reading bar meters
Booth Output
RCA outputs with level control for booth/link out to additional 'daisy-chain' mixers
FX Loop
Channels have an effect loop on switch with silent FET switching. Effect insert points are separate [TRS] inputs and outputs
3 Band EQ
Powerful 3 band 12dB/oct EQ with ëasymmetricí characteristic: +6dB boost emphasis and -26dB cut for frequency band elimination
Penny & Giles VCA Crossfader
An ultra-high quality Penny & Giles conductive plastic crossfader comes fitted as standard on the Xone:02. Replacement of crossfaders is easy - it takes only minutes to remove the faceplate and replace the fader unit.
Transform Switches
Performance channel mute controls which can be rotated to work up/down or left / right
Engineer / DJs Toolbox
High powered headphone output with level and mute switch. Booth/link output on TRS with level. 12 segment 3 colour bar metering displays CH1&2 or mix. Channels have 12 segment 3 colour bar meters. CH1/CH2 cue fader allows preview of x-fades
PSU
High performance internal switched-mode power supply. Universal mains input voltage
Options
Conductive plastic Penny & Giles x-fader
Connection
|
INPUTS
|
|
Turntable
|
RCA
|
RIAA Equalisation (Switch-able toline)
|
2-140mV 47K/330pF
|
|
Line
|
RCA
|
>8k2 ohms
|
-15 / +22 dBu
|
|
Effect Return
|
TRS jack
|
10k ohms
|
0dBu
|
|
Link IN
|
RCA
|
10k ohms
|
0dBu
|
|
MIC
|
XLR
|
<2k ohms Balanced
|
-10 / -50dBu
|
|
OUTPUTS
|
|
Main OUT
|
XLR
|
<47 ohms Balanced
|
0dBu
|
|
Effect Send
|
TRS jack
|
47 ohms Impedance Balanced
|
0dBu
|
|
Link/Booth
|
RCA
|
47 ohms
|
0dBu
|
|
Headphones
|
30-600 ohms, 75ohms recommended, Jack, Tip =left, Ring = right
|
|
|
|
|
500mW RMS into 47 ohms
|
|
|