Please Contact Us for an alternative. We can supply a great quote Or advise you on the best ampliifer for your system.
Crown XLS 802 XLS Series Power Amplifier
The Crown XLS 802 incorporates many popular features along with "set it and forget it" reliable design; all housed in an all steel 2U chassis, with efficient forced-air cooling fans preventing excessive temperature build up along with a chassis designed to give a free flow of air through the unit helping to keep things cool.
The inputs take the form of two industry standard electronically balanced female XLRs, one per channel. This, along with the touch proof binding posts and Speakon® outputs give the unit the feel of quality that has become synonymous with the Crown name. Add to this the precision level controls, power switch, power LED and LEDs to indicate signal, clip and fault for each channel, the XLS 802 is a well equipped amplifier delivering up to 1,600 Watts* of power, reliably; the way you want it. There is also an overload protection trip on the back of the unit protecting the amplifier from damage due to faulty or damaged wiring. All of this is backed up by an unsurpassed 3 year, no fault; fully transferable warranty; protecting your investment, guaranteeing its specifications and giving you peace of mind.
Minimum Guaranteed Power per channel, both channels driven
Crown XLS 802 XLS Series Power Amplifier
1 kHz with 0.5% THD
Stereo, 4 ohms (per ch.) 800W
Stereo, 8 ohms (per ch.) 580W
Bridge-Mono, 8 ohms 1,600W
If any company knows how to build a great power amp, it's Crown. They've been building rock-solid power amps for over 50 years, and their latest, the XLS Series of power amplifiers is no exception. The XLS Series has been engineered to handle the most demanding audio applications, perform reliably and priced to afford the smaller bands and mobile DJs, the power, quality and reliability that was previously beyond their budget! The XLS 802 Power Amp is housed in a rugged, all-steel 2U rack mount chassis making it a well built, solid amplifier that will take the stresses and strains of everyday use in its stride.
With some power amplifiers, there is a compromise between the amount of power and the level of induced background 'amplifier' noise. This is not the case with the XLS 802. Not only will the XLS 802 give you plenty of volume, it will deliver the cleanest possible audio thanks to its 21st century design.
The attractive appearance, quality engineering and the inclusion of key features requested by Crown customers; along with the reliability that has become the standard by which all other amplifiers have been measured, the XLS Series of amplifiers represent a new standard in power-to-performance at a price that won't break the bank.
Specifications - Crown XLS 802 XLS Series Power Amplifier
Sensitivity (volts RMS) for full rated power at 4 ohms 1.25
Frequency Response (at 1 watt, 22 Hz - 20 kHz) +0 dB, -1 dB
Signal to Noise Ratio below rated power (20 Hz to 20 kHz, inputs terminated)
A-weighted, below rated power > 100 dB
No weighting, below rated power > 95 dB
Total Harmonic Distortion (THD) at 1 full bandwidth power, from 20 Hz to1kHz<0.5%
Intermodulation Distortion (IMD) 60 Hz and 7 kHz at 4:1, from full rated output to -30 dB < 0.3%
Damping Factor (8 ohm): 10 Hz to 400 Hz > 200
Crosstalk (below rated power)at 1 kHz -75 dB at 20 kHz -50 dB
Input Impedance (nominal) (balanced,unbalanced) 20 kilohms, 10 kilohms
Load impedance
Stereo 4-8 ohms
Bridge mono 8 ohms
AC Line Voltage and Frequency Configurations Available (+-10%)
120 VAC 60 Hz
100 VAC 50/60 Hz
220 VAC 50 Hz
230-240 VAC 50 Hz
Ventilation Flow-through ventilation from front to back
Cooling Internal heat sinks with forced-air cooling
Air Volume Requirements(per minute, per unit) 80.15 ft3 (2.27 m3)
Dimensions: Width, Height, Depth EIA Standard 19"W (EIA RS-310-B) x 3.5
h(8.9 cm) H x 15.2" (38.6cm) D.
Net Weight / Shipping Weight: 35.5 lb (16.1 kg) / 40.5 lb (18.4 kg)
Crown XLS 802 XLS Series Power Amplifier
