Used within a system the Nexo LS600 Sub woofer R2 is ultra mobile, compact & lightweight, high SPL Nexo LS400 recommended amplifiers 1000 to 2000 watts @ 8 Ohms

The Nexo LS600 R2 Subwoofer Sub-Bass extends the usable range of the PS10 R2 Loudspeaker to 38Hz, providing exceptional performance and high power output (138dB Peak) in an extremely compact, light weight package.

The PS10 TDController's integral sub section and combined signal (PS10R2 and LS600) Speakon wiring ensure cost effective and simple system implementation. One LS600 is typically used with two PS10-R2 loudspeakers, additional units may be used for an enhanced effect.

SYSTEM APPLICATION

• Touring, installed PA for clubs, A/V, theatre, broadcast, Houses of Worship, etc. High-quality stage monitoring forcabarets A/V, theatre, broadcast, etc.

• Fill-in system for use with larger NEXO PS/Alpha systems, or any application needing exceptional side, down andnear-field augmentation.

KEY FEATURES Nexo LS600 R2 Subwoofer (Used with PS10 R2)

• High-power system (138dB Peak SPL @ 1m)with 15in VLF long excursion driver.
• VLF extension (to 38Hz) of PS10R2 Loudspeakers.
• Sophisticated control electronics ensure reliable, linear operation.
• Integral pole mount that supports one or two PS10R2 Loudspeakers.

LS600 PRODUCT FEATURES
Components	LF 1 x 15" (38cm) long excursion Neodymium 8Ω driver.
Height x Width x Depth	435mm x 688mm x 528 mm (17.12" x 27.09" x 20.79").
Weight	30 kg (66 Lbs) net.
Connectors	2 x NL4MP SPEAKON 4 pole.
Construction	Baltic Birch Ply & textured, polyurethane black coating.
Fittings	Handles 2 Metal recessed pockets.
Flying Points	One plate connecting with external accessories.
Stand fittings	Internal Steel Stand Fitting on Top (35mm, 1 3/8") allows pole mounting for 1 PS10-R2.
SYSTEM SPECIFICATIONS LS600 with PS10 TDController-R2
Frequency Response [a]	40 Hz - 110 Hz ±3dB.
Usable Range @-6dB [a]	38 Hz - 120 Hz.
Sensitivity 1W @ 1m [b]	101 dB SPL Nominal.
Nominal Peak SPL @ 1m [b]	135 to 138 dB Peak.
Crossover Frequencies	120 Hz Active through PS10 TD Controller-R2.
Nominal Impedance	8 Ohms.
Recommended Amplifiers	1000 to 2000 Watts / 8 Ohms.

SYSTEM OPERATION Nexo LS600 R2 Subwoofer (Used with PS10 R2)
Electronic Controller	The LS600 Subwoofer must be used with a Nexo Controller (PS10TD -R2, NX242, or NXAMPS). Use without a properly connected Controller will result in poor sound quality and may damage the components.
Subbass	The LS600 Subwoofer provides optional VLF extension for PS10R2 Loudspeakers. Active two-way operation with the PS10-R2 is included in the PS10TD-R2, NX242 or NXAMPS. One LS600 matches 2 x PS10-R2, additional LS600 may be used for enhanced effect.
Speaker Cables	The PS10R2 is wired 2- & 2+ on Speakon connectors, LS600 on 1- & 1+. Loop through Speakons are present on both products. Single identical cables can thus be used to loop through combinations of up to 2 x PS10R2 & 1 x LS600 in no particular order. As part of a policy of continual improvement, NEXO reserves the right to change specifications without notice.
SHIPPING & ORDERING
Packaging	LS600 is packaged as a single product.
Shipping Weight & Volume	29.4 kg (64.68 lbs) / 0.265 cubic metres.

Architectural and Engineering Specification
The sub-bass loudspeaker system shall have one 15in VLF long excursion cone transducer. Nominal Sensitivity shall be 101dB. When driven by a NEXO NXAMP 4x1, NXAMP 4x4 a PS10 TDController-R2 or by a NX242 properly-connected to amplification capable of delivering 1000 to 2000 Watts into a 4Ω (nominal) load the system shall be capable of 135dB to 138dB peak SPL, with a frequency response of 40Hz to 110Hz ±3dB (38Hz to 120kHz ±6dB). The system shall include
an active crossover. Electrical connections shall be made via two 4-pole NL4MP SPEAKON connectors. The system shall have a tuned ported rectangular enclosure constructed of 18ply Baltic birch, finished in structured black coating and having exterior dimensions no greater than 430mm H x 689mm W x 528mm D (16.9in H x 27.1in W x 20.8in D): the system shall weigh 33.0kg (73.9lbs). Exterior hardware shall include 1 metal plate, 2 attachment points and 1-pole socket. Interior components shall be protected by a powder coated perforated steel grille. The system shall be the NEXO LS 600 with either the PS10 TDController-R2, NXAMP 4x1, NXAMP 4x4 or NX242.

Nexo LS600 R2 Subwoofer Used with PS10 R2