Recommended power amplifier 500 to 1250 watts @ 8 Ohms. The  Nexo PS10 R2 loudspeaker, can be used with LS600 sub as a system, great sound & very high quality.

The Nexo PS10 R2 Left loudspeaker - Wedge can be safely driven with up to 1250 Watts of amplifier power, yet it is only half the weight and volume of common trapezoidal systems. The dispersion, architecture and weight balance of the PS10-R2 are designed to provide both exceptional PA and stage monitor performance from a single product without compromise.

This flexibility is realized by a proprietary constant directivity asymmetrical dispersion horn, easily rotated in four positions by the user. Coupled with the horn's unique progressive horizontal (50° to 100°) and vertical (55°) dispersion, the most suitable pattern can be selected for vertical or horizontal PA usage or wedge monitoring. The 2-way passive 8Ω design uses a single amplifier channel to deliver bi-amped performance for less money, space and complexity.

SYSTEM APPLICATIONS

• Touring, installed PA for clubs, A/V, theatre, broadcast, Houses of Worship, etc. High-quality stage monitoring for cabarets A/V, theatre, broadcast, etc.
• Fill-in system for use with larger NEXO PS/Alpha systems, or any application needing exceptional side, down and near-field augmentation.

KEY FEATURES

• Touring, installed PA for clubs, A/V, theatre, broadcast, Houses of Worship, etc. High-quality stage monitoring for cabarets A/V, theatre, broadcast, etc.
• Fill-in system for use with larger NEXO PS/Alpha systems, or any application needing exceptional side, down and near-field augmentation.

Nexo PS10 R2 Left loudspeaker - Wedge PRODUCT FEATURES
Components	1 x 10" (25cm) Shielded Neodymium 8Ω driver.
	HF 1 x 1" throat driver + Low Distortion Constant Directivity Asymmetrical Dispersion Horn.
HeightxWidthxDepth	515mm x 316mm x 277 mm (20.28" x 12.44" x 10.91").
Weight	14 kg (31 lbs).
Connectors	2 x NL4MP Speakon 4 pole.
Construction	Baltic Birch Ply finished with structured black coating.
Fittings	2 Metal recessed pockets
Front finish	Moulded Dark Grey Metal Grill.
Flying Points	One plate connecting with external accessories.
Stand fittings	Built in Steel Stand Fitting, (35mm / 1 3/8").
SYSTEM SPECIFICATIONS PS10-R2 with PS10 TDController-R2
Frequency Response [a]	65 Hz - 20 kHz ±3dB.
Usable Range @-6dB [a]	58 Hz - 21 kHz.
Sensitivity 1W @ 1m [b]	99 dB SPL Nominal - 97 dB SPL Wideband.
Nominal Peak SPL@ 1m [b]	129 to 132 dB Peak
HF Dispersion [c]	50° to 100° Hor. x 55° Vert. Rotatable Horn, 4 positions.
Directivity Q & DI [c]	Q : 16 Nominal DI : 12 dB Nominal.( f > 3 kHz )
Crossover Frequencies	2 kHz Passive.
Nominal Impedance	8Ω
Recommended Amplifiers	500 to 1250 W / 8 Ω
SYSTEM OPERATIONS
Electronic Controller	The PS10 TDController-R2 is precisely matched to the PS10-R2 & LS600 cabinets and includes sophisticated protection systems. Using PS10-R2 & LS600 without a properly connected PS10 TDController-R2 will result in poor sound quality and can damage the components.
Dispersion configuration	After dismounting front grill from its fixings, the HF Horn can be rotated in 4 positions for dispersion configuration.
Sub-bass	The PS10-R2 can be used without optional LS600 Sub-Bass. Active two-way operation with the LS600 is included in the PS10 TDController-R2. One LS600 matches 2 x PS10-R2, additional LS600 may be used for enhanced LF capability.
Speaker Cables	PS10-R2 are wired 2- & 2+ on Speakon connectors, LS600 on 1- & 1+. Loop through Speakons are presentcon both. Single identical cables can thus be used to loop through combinations of up to 2 x PS10-R2 & 1 x LS600 in no particular order.
SHIPPING & ORDERING SPECIFICATIONS Nexo PS10 R2 Left loudspeaker - Wedge
Packaging	PS10-R2 is packaged as a single product.
Shipping Weight & Volume	17.3 kg (38 lbs) / 0.169 cubic metres (5.96 cubic feet).
Accessories	A full selection of mounting Accessories is available, please contact Ultimate Pro Audio for details.

As part of a policy of continual improvement, NEXO reserves the right to change specifications without notice.

[a] Response curves & data : Anechoic Far Field for the PS10-R2 + PS10TDController-R2. Half-Space Anechoic radiation for the LS600 + PS10 TDController-R2.

[b] Sensitivity & Peak SPL data : these will depend on spectral distribution and crest factor of program material. Measured with band limited Pink Noise. Nominal refers to Voice Decade (300 Hz - 3 kHz), Wideband to the specified ±3dB range. Data are for speaker + processor + recommended amplifier combinations. Peak SPL is at clipping of recommended amplifier.

[c] Directivity curves & data : obtained by computer treatment on off axis response curves.

E&OE September 2009.

Architectural and Engineering Specifications
The 2-way loudspeaker system shall have one 10in 8Ω cone transducer and a 1in compression driver on a low distortion constant directivity asymmetrical dispersion horn. The system's horizontal coverage shall range from 50° to 100°, with vertical coverage of +25° and -30°. The user shall be able to rotate the horn in 4 directions as required by the application. The system shall have a Q of 16 and a Directivity Index that is 12 at frequencies above 3kHz. Nominal Sensitivity shall be 99dB (97dB wideband). When driven by a NXAMP 4x1, NXAMP 4x4 a PS10 TDController-R2 or by a NX242 properly connected to amplification capable of delivering 500 to 1250 Watts into an 8Ω (nominal) load the system shall be capable of 129dB to 132dB peak SPL, with a frequency response of 65Hz to 20kHz ±3dB (58Hz to 21Hz ±6dB). The system shall include an internal passive crossover. Electrical connections shall be made via two 4-pole NL4MP SPEAKON connectors.

The system shall have a tuned ported multi-angle enclosure constructed of 18ply Baltic birch, finished in structured black coating and having exterior dimensions no greater than 515mm H x 316mm W x 277mm D (20.3in H x 12.4in W x 10.9in D): the system shall weigh 15.0kg (33.6lbs). Exterior hardware shall include 1 metal plate, 2 attachment points and 1-pole socket. Interior components shall be protected by a powder coated perforated steel grille. The system shall be the
PS10-R2 with either the PS10 TDController-R2, NXAMP 4x1, NXAMP 4x4 or NX242.

Nexo PS10 R2 Left loudspeaker - Wedge