PS15 R2 Right Loudspeaker- Wedge Recommended power amplifier 1000 to 2000 watts @ 8 Ohms. The  Nexo PS15 R2 loudspeaker, can be used with RS15 sub as a system, great sound & very high quality.

The Nexo PS15 R2 Right Loudspeaker- Wedge is designed to provide both exceptional PA and stage monitor performance from a single product without compromise.

This flexibility is realized by a proprietary constant directivity asymmetrical dispersion horn, easily rotated in four positions by the user. Coupled with the horn's unique progressive horizontal (50° to 100°) and vertical (55°) dispersion, the most suitable pattern can be selected for vertical or horizontal PA usage or wedge monitoring. The 2-way passive 8Ω design uses a single amplifier channel to deliver bi-amped performance for less money, space and complexity.

The Nexo PS15 R2 Right Loudspeaker- Wedge can be driven with up to 2000 Watts of amplifier power.

SYSTEM APLLICATIONS

• High-power mid-sized touring, installed PA for clubs, A/V, theater, Houses of Worship, broadcast, etc.
• High-quality, extremely powerful stage monitoring for A/V, theatere, cabarets, broadcast, etc.
• Fill-in system for any PA requiring side, down and near-field augmentation.

KEY FEATURES

• High-power system (136dB Peak SPL @ 1m) with 15in LF and 2in HF drivers.
• Rotatable asymmetrical horn and unique cabinet architecture ensure versatility; useradaptable for both PA and stage monitoring applications.
• Two-way, switchable passive or active design for precise performance-matching to user requirements.
• Sophisticated control electronics ensure reliable, linear operation.
• Supported with a full range of mounting and flying accessories.

Product features Nexo PS15 R2 Right Loudspeaker- Wedge
Components	LF 1 x 15" (38 cm) long excursion Neodymium 8Ω driver. HF 1 x 2" throat, 3" Titanium diaphragm compression driver + Low Distortion, Constant Directivity Asymmetrical Dispersion Horn.
Height x Width x Depth	675 x 434 x 368 mm (26.57" x 17.08" x 14.48").
Weight	28 kg (62 lbs).
Speakon Connectors	2x4 pole in & loop thru (switch passive to active inside).
Construction	Baltic Birch Ply finished with structured black coating.
Fittings	Handles 2 metal recessed pockets.
Front Finish	Moulded dark grey metal grille.
Flying Points	Two plate connecting with external accessories.
Stand fittings	Built in steel stand fitting (35mm / 1 3/8").
SYSTEM SPECIFICATIONS PS15-R2 with PS15 TDController-R2
Frequency Response [a]	50 Hz - 18 kHz ±3 dB.
Usable Range @-6dB [a]	47 Hz - 18 kHz.
Sensitivity 1W @ 1m [b]	102 dB SPL Nominal / 99 dB SPL Wideband.
Nominal Peak SPL @ 1m[b]	133 to 136 dB Peak.
HF Dispersion [c]	50° to 100° Horizontal x 55° Vertical Rotatable Horn, 4 positions.
Directivity : Q & DI [c]	Q : 16 Nominal / DI : 12 dB Nominal ( f > 1.5 kHz ).
Crossover Frequencies	1.1 kHz Passive or Active (internally switchable).
Nominal Impedance	Passive 8Ω or Active LF 8Ω, HF 16Ω.
Recommended Amplifiers	Passive 1000 to 2000 W 8Ω. Active LF 1000 to 2000 W 8Ω / HF 250 to 500 W 16Ω. Important: Active mode only available on NXAMP
SYSTEM OPERATIONS
Electronic Controller	The PS15TD Controller-R2 is precisely matched to the PS15-R2 & RS15 cabinets and includes protections. Using PS15-R2 & RS15 without a properly connected PS15 TDController-R2 will result in poor sound quality and can damage the components.
Dispersion Configuration	After dismounting the front grille from its fixings, the HF Horn can be rotated in 4 positions for dispersion configuration.
Sub-bass	The PS15-R2 can be used without optional RS15 Sub-bass. Active two-way operation with RS15 is included in the PS15 TDController-R2. One RS15 matches 2 x PS15-R2, additional RS15 may be used for enhanced LF capability.
Speaker Cables	PS15R2 are wired 2-/2+ on Input Speakons in Passive Mode. PS1R25 are wired LF 1-/1+ & HF 2-/2° on Input Speakons in Active Mode. Please refer to RS15 User Manual for RS15 for RS15 connection.
SHIPPING & ORDERING SPECIFICATIONS
Packaging	PS15-R2 is packaged as a single product.
Shipping Weight & Volume	33 kg (72.6 lbs) / 0.2 cubic metres (7 cubic feet).
Accessories	A full selection of mounting Accessories is available, please contact Ultimate Pro Audio for details.

As part of a policy of continual improvement, NEXO reserves the right to change specifications without notice.

[a] Response curves & data : Anechoic Far Field for the PS15-R2 + PS15TDController-R2. Half-Space Anechoic radiation for the RS15R2 + PS15TDController-R2.

[b] Sensitivity & Peak SPL data : these will depend on spectral distribution and crest factor of program material. Measured with band limited Pink Noise. Nominal refers to Voice Decade (300 Hz - 3 kHz), Wideband to the specified ±3 dB range. Data are for speaker + processor + recommended amplifier
combinations. Peak SPL is at clipping of recommended amplifier. Measurements made with PS15-R2s in passive operation mode.

[c] Directivity curves & data : obtained by computer treatment on off axis response curves.

E&OE September 2009.

Architectural and Engineering Specifications

The 2-way full range loudspeaker system shall have one 15in 6Ω cone transducer and a 2in compression driver on a low distortion constant directivity asymmetrical dispersion horn. The system's horizontal coverage shall range from 50° to 100°, with vertical coverage of +25° and -30°. The user shall be able to rotate the horn in 4 directions as required by the application. The system shall have a Q of 16 and a Directivity Index that is 12 at frequencies above 1.5kHz. Nominal Sensitivity shall be 102dB (99dB wideband). When driven by a NEXO NXAMP 4x1, NXAMP 4x4 a PS15 TDController- R2 or by a NX242 properly connected to amplification capable of delivering 1000 to 2000 Watts into an 8Ω_(nominal) load the system shall be capable of 133dB to 136dB peak SPL, with a frequency response of 50Hz to 18kHz ±3dB (47Hz to 18Hz ±6dB). The system shall include an active or passive crossover with internal switching. Electrical connections shall be made via three 4-pole NL4MP SPEAKON connectors. The system shall have a tuned ported multi-angle enclosure constructed of 18ply Baltic birch, finished in structured black coating and having exterior dimensions no greater than 675mm H x 434mm W x 368mm D (26.6in H x 17.1in W x 14.5in D): the system shall weigh 29.0kg (65.0lbs). Exterior hardware shall include 1 metal plate, 2 attachment points and 1-pole socket. Interior components shall be protected by a powder coated perforated steel grille. The system shall be the NEXO PS15 R2 with either the PS15 TDController-R2, NXAMP 4x1, NXAMP 4x4 or NX242.

Nexo PS15 R2 Right Loudspeaker- Wedge