Phonic´s MAX 2500 Power Amplifier provides 1500 Watts of power at 8 ohms (bridge mono) or 750 Watts at 4 ohms (stereo)- ideal for medium to large-size clubs, churches, auditoriums and more. Input to the MAX 2500 amp is achieved via combo connectors that accept both XLR and 1/4" jacks, and output is achieved through either Speakon-type connectors or binding posts. The MAX 2500 features ground switches, user defeatable clip limiters, selectable high pass filters, and the option to choose between stereo, parallel and bridge operating modes, making this amplifier ideal for real world application.

Product Overview:

Product Specifications:

Stereo Mode (driving both channels)	Continuous Average Output Power Per Channel
8Ω EIA 1kHz 0.1%THD	500W
4Ω EIA 1kHz 0.1%THD	750W
Bridge Mono Mode	Continuous Average Output Power
8Ω EIA 1kHz 0.1%THD	1500W
Output Circuitry	Class H
Input sensitivity @ 8Ω	1.23V (+4dBu)
Distortion(SMPTE-IM)	<0.02%
Noise (unweighted 20Hz-20KHz below rated output)	100dB
Damping Factor	>300@8Ω
Frequency Response	20 Hz-20KHz, +0/-1dB; -3dB points: 5Hz-50KHz
Input Impedance	20 K Ω balanced, 10 K Ω unbalanced
Cooling	Continous variable-speed fan, front-to-rear air flow
Connectors (each channel)	Input: XLR & 1/4" TRS; Output: Speakon and binding posts
Indicators	Power: Blue LED; SIGNAL: Green LED; PEAK: Red LED,
Controls
Front panel	CH1 & CH2 GAIN knobs with 41 detents
Rear panel	Slide switches: Limiter On/Off; Operation mode: Parallel, Stereo, Bridge Mono; Grounding / Floating; Selectable low cut filter at 30Hz and 50Hz
Protection Circuitry	Short circuit, thermal, subsonic, RF protection, Output DC offset, Power on/off muting
Power Comsuption	1400W
Power Requirement (depends on region)	100-120VAC, 220-240VAC, 50/60HZ
Dimensions (WxHxD)	482.6 x 88 x 415 mm (19" x 3.46" x 15.9")
Weight	16.5 kg (36.4 lbs)