Receive your RF signal with the Sennheiser EM 300 G3 Receiver. The EM 300 G3 Receiver has many features including Networking to your PC with Sennheiser Wireless Systems Manger and built in EQ that is pre-settable. Easy Sync

Sennheiser understands that the more self-reliant a device is, the more artistic freedom there is to enjoy. With this in mind, this new receiver has a built-in Ethernet port for remote PC monitoring and setup with Sennheiser's Wireless System Manager software. This receiver's wireless sync function makes it a breeze to link up any G3 transmitter with the unit. In addition, it has a large backlit graphic display where receiver and transmitter information can be easily seen even on the darkest of stages.

Channel 38 Now Available

All Sennheiser systems or components are supplied on 'Band E' 863MHz - 865MHz if you require different frequency bands please contact us  (Note frequencies 790-862 MHz will not be available towards the end of 2012 This covers channels 61 69 but leaves channel 70 863 - 865MHz In band 'E')

If you don't want to buy a licence then Band E is what you will require.

Now available - The eagerly anticipated G3 'GB frequency' range variant covers ALL of Channel 38 and as many ‘future proofed’ interleaved frequencies above Channel 38 as its 42 MHz (from 606-648 MHz) tuning range will allow. This is the frequency that is replacing Channel 69! A licence is required to use any frequency other than channel 70 which is in band range 'E'

Features

• Sturdy metal housing
• 42 MHz bandwidth: 1680 tunable UHF frequencies for interference-free reception
• Enhanced frequency bank system with up to 24 compatible frequencies
• Ethernet port for connecting to the Wireless Systems Manager (WSM) software for control via computer - this delivers a good overview of monitoring and professional data management for multi-channel systems
• High-quality true diversity reception
• Pilot tone squelch for eliminating RF interference when transmitter is turned off
• Automatic frequency scan feature searches for available frequencies
• Enhanced AF frequency range
• Wireless synchronization of transmitter parameter from receiver
• User-friendly menu operation with more control options
• Illuminated graphic display, receiver also shows transmitter settings
• Auto-Lock function avoids accidental changing of settings
• HDX compander for crystal-clear sound
• Receiver shows transmitter battery indication in 4 steps
• Integrated Equalizer and Soundcheck mode
• Wide range of accessories adapts the system to any requirement

Delivery Includes

• 1 EM 300 G3 rack-mount receiver
• 1 GA 3 rack mount
• 1 NT 2 power supply unit
• 2 antennas
• Operating instructions

Technical Data

RF frequency range	516..... 865 MHz
Transmission/receiving frequencies	1680
Presets	max 24
Switching bandwidth	42 MHz
Peak deviation	+/- 48 kHz
Compander	HDX
Frequency response (microphone)	25.....18000 Hz
Signal-to-noise ratio	> 115 dB(A)
THD, total harmonic distortion	< 0,9 %
In compliance with	ETS 300422 , ETS 300445 , CE , FCC
Antenna connector	2 BNC, 50 Ohm
Audio-XLR connector	XLR / 6,3 mm jack
Audio output level (balanced)	XLR: +18 dBu max
Audio output level (unbalanced)	Jack: +12 dBu max
Dimensions (Receiver)	212 x 202 x 43 mm
Weight (Receiver)	980 g