XTA D2 Dual Dynamic Equaliser
The D2 is a powerful DSP based audio dynamics processor, ideally suited for live sound applications, where it combines the accessibility and immediacy of a pure analogue design with the quality and accuracy of a digital design in a compact 1U unit. To achieve this, the D2 has an analogue control surface, following the 'one control - one function' philosophy and a pure digital signal path, with 24-bit conversion, 40-bit internal processing and a professional 48kHz sampling rate. The D2 is also available with optional AES/EBU digital inputs and outputs.
FEATURES - XTA D2 Dual Dynamic Equaliser
♦ Three bands of full range dynamic equalisation on each channel.
♦ Independent control of envelope and frequency for each equaliser band.
♦ 'Outer' bands can be set to high and low shelving responses respectively, with the option of working in full-range if required.
♦ Separate 'Listen' facility for each band to easily gauge its contribution to the overall channel's sound.
♦ Each band is individually bypassable for complete control, with an overall channel master.
♦ Additional full-range compressor is included.
♦ AES/EBU Digital input and output interfaces are available as an option.
♦ Input and output balancing transformers are also available as an option.
SPECIFICATIONS - XTA D2 Dual Dynamic Equaliser
Inputs: 2 electronically balanced *
Impedance: > 10k ohms.
CMRR : >65dB 50Hz - 10kHz.
Outputs: 2 electronically balanced*
Source Imp: < 60ohms
Min. Load: 600ohm
Max. Level: +20dBm into 600 ohm
Frequency Resp.:+½dB 20Hz-20kHz
Dyn Range:>110dB 20Hz-20k unwtd
Distortion:< .02%@1kHz,+18dBm
Dynamic EQ Bands:
Threshold: -30dBu to +22dBu
Ratio: 1:1 to 16:1
Attack: -60uS to 250mS
Release: 25mS to 4 S
Make-up Gain: 0 to +15dB
Sidechain EQ Section
Type: Selectable high/low shelf or narrow/wide parametric response.
Centre/corner Freq: 20Hz to 20k
Gain: +6,9 or 15dB and 'Off'
Sidechain monitor available.
Input/Output meter: 6 point,
-12dBu to +18dBu.
Gain Reduction meter: 4 x 6 point,
1dB to 15dB gain reduction.
Connectors
Inputs: 3 pin female XLR
Outputs: 3 pin male XLR.
Power: 3 pin IEC
Power: 60 to 250V ±15% @ 50/60Hz.
Consumption: < 20 watts.
Weight: 3.5kg. Net (4.8kg. Shipping)
Size: 1.75"(1U) x 19" x 11.8"
(44 x 482 x 300mm) excluding connectors.
Options * = Transformers available.
Optional Interfaces AES/EBU Digital Input/Output
XTA D2 Dual Dynamic Equaliser
